Mechanical
Automobile
Automobile systems, braking, suspension, and vehicle fabrication projects.
Showing 224 projects
| Code | Title | Enquire |
|---|---|---|
| ENAU-01 | Catalytic converter for Two wheeler | |
| ENAU-02 | Fabrication of Auto clutch for Automobile | |
| ENAU-03 | Automobile suspension made of hydraulic magneto rheological damper | |
| ENAU-04 | Wireless tyre pressure monitoring system | |
| ENAU-05 | Fabrication of Motorized Center stand for cycle/bike | |
| ENAU-06 | Pneumatic controlled steps in bus with break locking system | |
| ENAU-07 | Sensor Operated Automatic Reverse Braking System | |
| ENAU-08 | Fabrication of foot board break system for car | |
| ENAU-09 | Intelligent Braking System in Four Wheeler (IBS) | |
| ENAU-10 | Remote controlled hydraulic jack trolley | |
| ENAU-11 | Intelligent Active Suspension system for two wheeler | |
| ENAU-12 | Elimination of chain drive in bicycle | |
| ENAU-13 | Fabrication of Wind Energy Vehicle | |
| ENAU-14 | Automobile dual side wiper system with mist control | |
| ENAU-15 | Automatic Railway Gate Controller | |
| ENAU-16 | Dual Brake Single liver System for two wheeler | |
| ENAU-17 | Fabrication of compressed air generation using speed breaker | |
| ENAU-18 | Automatic Differential Unit locking system | |
| ENAU-19 | Fabrication of Hybrid driving seat | |
| ENAU-20 | Pneumatic Disc Braking System (PDBS) | |
| ENAU-21 | Automatic pneumatic bumper and break actuation before collision | |
| ENAU-22 | Automatic tyre pressure inflation system | |
| ENAU-23 | Shock observer power generation system | |
| ENAU-24 | Automatic clutch and brake system for four wheeler(pneumatic) | |
| ENAU-25 | Energy conversion from Roadways using kinetic motion | |
| ENAU-26 | Fabrication of Multiple Car safety system in bumper | |
| ENAU-27 | Automatic head lamp alignment system depending upon steering | |
| ENAU-28 | Fabrication of vertical bridge lifter | |
| ENAU-29 | Automatic pneumatic bumper for four wheeler | |
| ENAU-30 | Anti-Lock Braking System In Four wheeler (ABS) | |
| ENAU-31 | Automatic drunken drive avoiding with helmet locking system | |
| ENAU-32 | Vehicle Accident information through SMS(automatic) | |
| ENAU-33 | Automatic safety systems for railway coaches | |
| ENAU-34 | Fabrication of LPG Gas kit for Four Wheeler | |
| ENAU-35 | Fabrication of Chainless string cycle | |
| ENAU-36 | Fabrication of Bicycle wind turbine | |
| ENAU-37 | Fabrication of Automatic pneumatic jack | |
| ENAU-38 | Three axis pneumatic modern trailer | |
| ENAU-39 | Automatic Track Guided Vehicle (ATGV) | |
| ENAU-40 | Automatic Distance Measurement and Braking System By using Ultrasonic Waves | |
| ENAU-41 | Automated Guided Vehicle (AGV) | |
| ENAU-42 | Pneumatic speed breaker with day and night control | |
| ENAU-43 | Sterling engine with parabolic collector (Model) | |
| ENAU-44 | Automatic Reverse locking system using differential unit | |
| ENAU-45 | Automatic Visitor Guided with material handling Vehicle | |
| ENAU-46 | Automatic steering control system for automobile | |
| ENAU-47 | Power generation from road transport using piezoelectric and rack & pinion | |
| ENAU-48 | Electronic assisted hydraulic braking system | |
| ENAU-49 | Remote controlled scrap collecting vehicle | |
| ENAU-50 | Fabrication of Aerodynamic design for buses | |
| ENAU-51 | Hub center steering system for two wheeler | |
| ENAU-52 | Compressed air production using vehicle suspensor | |
| ENAU-53 | Combination of emergency, intelligence and anti-lock braking system | |
| ENAU-54 | Fabrication of Air bag system for two wheeler-air bag automation | |
| ENAU-55 | Automatic Magnetic Accident preventer for Train | |
| ENAU-56 | Automatic pneumatic disc braking system | |
| ENAU-57 | Cold Start Performance Enhancement of Motorcycle Catalytic Convertor by Latent Heat Storage System | |
| ENAU-58 | Exhaust gas recirculation system (EGR) for two wheeler | |
| ENAU-59 | Generation of electricity using the flow or velocity of Vehicle exhaust gas | |
| ENAU-60 | Automatic Electro-Magnetic gear transmission for two wheeler | |
| ENAU-61 | MHD power generation for two wheeler | |
| ENAU-62 | Super charging an engine using vehicle suspension | |
| ENAU-63 | Active brake torque vectoring in differential unit for quick turning | |
| ENAU-64 | Total Electrical system for automobile (headlights, taillights, indicators and wiper) | |
| ENAU-65 | Regenerative braking using pneumatic interface | |
| ENAU-66 | Efficiency increasing system by using preheating method | |
| ENAU-67 | Fabrication of Water fuel injection for mini boat | |
| ENAU-68 | Fabrication of Pollution free four stroke petrol engine | |
| ENAU-69 | Electronic Fuel Injection (EFI) system for Two wheeler | |
| ENAU-70 | Fabrication of Air brake system using Engine exhaust gas | |
| ENAU-71 | Fabrication of Sweeper vehicle | |
| ENAU-72 | Fabrication of Steer-by-wire system for cars | |
| ENAU-73 | Highways Speed controller and automatic Pneumatic Braking System | |
| ENAU-74 | Fabrication of turbo charger for two wheeler | |
| ENAU-75 | Both wheel driven step less speed variable bicycle | |
| ENAU-76 | Fabrication of Eddy current braking system | |
| ENAU-77 | Fabrication of Ethanol fuel engine | |
| ENAU-78 | Automatic Vehicle Over speed controlling system for School Zone | |
| ENAU-79 | Fabrication of Air engine | |
| ENAU-80 | Fuel efficiency increasing system by using peltier Air preheated system | |
| ENAU-81 | High efficient cooling system in a car with help of BLDC motor | |
| ENAU-82 | Magneto Hydro Dynamic(MHD) braking system | |
| ENAU-83 | Fabrication of Turbo charged two wheeler with zero turbo lag | |
| ENAU-84 | Fabrication Automatic lawn mover | |
| ENAU-85 | Fabrication of Four bar cycle drive mechanism | |
| ENAU-86 | Fabrication of Foldable all wheel drive bicycle | |
| ENAU-87 | Fuel efficiency improvement by using Acetylene powered engine | |
| ENAU-88 | Fabrication of Gyro stabilized two wheeler | |
| ENAU-89 | Automatic speed breaker for preventing accident in school zone | |
| ENAU-90 | Button operated electro-magnetic gear shifting system for two wheeler | |
| ENAU-91 | Rear wheel steering for trailer truck | |
| ENAU-92 | Fabrication of concept bicycle (future bicycle) | |
| ENAU-93 | Generative breaking system using pneumatic interface | |
| ENAU-94 | Fabrication of brown gas Engine | |
| ENAU-95 | Heating and cooling jacket by using peltier effect | |
| ENAU-96 | Automatic Electro-magnetic Clutch | |
| ENAU-97 | Automatic car window opening by using sound and oxygen sensors | |
| ENAU-98 | Automatic acceleration control in traffic signal | |
| ENAU-99 | Exhaust gas (silencer) heat recovery (TEG) power generation system | |
| ENAU-100 | Automatic Queries controlling system for two wheeler | |
| ENAU-101 | Automatic air delivered system based on density of oxygen in car cabin | |
| ENAU-102 | Highways High Speed Sensing and Automatic Speed Braking System | |
| ENAU-103 | Electro-magnetic actuator in ABS for two wheeler | |
| ENAU-104 | Electric Pulse Magnetic Braking (EPM Braking) System | |
| ENAU-105 | Design & fabrication of leaf spring fatigue testing machine | |
| ENAU-106 | Safety system to avoid accident when driver in sleep | |
| ENAU-107 | Fabrication of fuel less reciprocating air engine | |
| ENAU-108 | Hybrid vehicle with regenerative breaking motor cycle | |
| ENAU-109 | Over speed indication and Automatic accident Avoiding System for four wheeler | |
| ENAU-110 | Fabrication of Ferro fluid power generation | |
| ENAU-111 | Fabrication of double gear bicycles | |
| ENAU-112 | Air preheating System using condenser waste heat in automobile | |
| ENAU-113 | Automatic speed breaker depending upon vehicle over speed control | |
| ENAU-114 | Button operated Pneumatic gear shifting in two wheeler | |
| ENAU-115 | Fabrication of Magnetic fuel modifier used in IC engine | |
| ENAU-116 | Fabrication of Methane gas Engine | |
| ENAU-117 | Optional acceleration circuit to increase the fuel efficiency of single cylinder Petrol engine by using double carburetor method | |
| ENAU-118 | Fuel Efficiency improvement in petrol Engine by using Water injection | |
| ENAU-119 | Fabrication of Safety bike | |
| ENAU-120 | Remote controlled tilting handicapped wheel chair | |
| ENAU-121 | Automatic Electro-Hydraulic Jack for Four Wheeler | |
| ENAU-122 | Fabrication of Engine Drive Cycle | |
| ENAU-123 | Kinetic Energy Recovery System (KERS) cycle | |
| ENAU-124 | Fabrication of Electro-magnetic Engine | |
| ENAU-125 | Electro-Hydraulic Braking (EHB) system for Four Wheeler | |
| ENAU-126 | Fabrication of Direct drive wheel | |
| ENAU-127 | Shock Absorber test rig using Cam and Sensors | |
| ENAU-128 | Adaptable Multi Nut Fastener With Manual Height Adjustment System | |
| ENAU-129 | Joystick control car drive mechanism for physically challenged people | |
| ENAU-130 | Fabrication of Solar Race Car (Modal) | |
| ENAU-131 | Emission control in two stroke petrol engine by using multiple spark | |
| ENAU-132 | Magnetically Levitated Train/Flight | |
| ENAU-133 | Dual power generation system for Automobile (thermoelectric + exhaust gas power generation) | |
| ENAU-134 | Enhancing The IC Engine Performance By Using The Electrolysis And Preheating Process | |
| ENAU-135 | Automatic gear changer in bicycle | |
| ENAU-136 | Eye blink sensor based automatic breaking and bumper system | |
| ENAU-137 | Bio gas two wheeler with power generation | |
| ENAU-138 | Fabrication of Self running bicycle | |
| ENAU-139 | Fabrication of Fully Automated Intelligent Vehicle | |
| ENAU-140 | Fabrication of Motor bike with propeller shaft | |
| ENAU-141 | Automatic turbo charger at low and high speed of vehicle | |
| ENAU-142 | Air Engine with load testing (Dynamo Meter) Arrangement | |
| ENAU-143 | Regenerative compressed air system by suspension for automatic turbo lag reduction | |
| ENAU-144 | Fabrication of weighing bridge in moving vehicle | |
| ENAU-145 | Fabrication of Pulse jet engine (Model) | |
| ENAU-146 | Automatic car covering device For Automobile | |
| ENAU-147 | Hydraulic parking attachment for car | |
| ENAU-148 | Fabrication of Air powered wheel chair | |
| ENAU-149 | Cryogenic liquid nitrogen as a fuel for zero emission vehicle | |
| ENAU-150 | Fabrication of Solar E cycle | |
| ENAU-151 | Fabrication of Anti theft steering system | |
| ENAU-152 | Electro-Hydraulic System for Automation in Four Wheeler | |
| ENAU-153 | Fabrication of Energy produced from running vehicle | |
| ENAU-154 | Fabrication of Anti drown vehicle | |
| ENAU-155 | Efficient Car Parking System for four wheeler | |
| ENAU-156 | Fabrication of Fuel cell bike | |
| ENAU-157 | Triangular air Compressor with Common Compression Chamber | |
| ENAU-158 | Water fuel engine with power generation | |
| ENAU-159 | Vehicle ignition using RFID and finger print | |
| ENAU-160 | Intelligent gear transmission system with active helmet vehicle | |
| ENAU-161 | Magneto Rheological Fluid (MRF) Braking system | |
| ENAU-162 | Foldable Electric GoPed Two wheeler | |
| ENAU-163 | Motorized triangular air compressor | |
| ENAU-164 | Fabrication of Hubless cycle | |
| ENAU-165 | Experimental study and Application in Nanofluid in refrigeration | |
| ENAU-166 | Fabrication of Magneto rheological clutch with load test | |
| ENAU-167 | Touch screen based automatic gear shifting system | |
| ENAU-168 | Water Fuel (Hydrogen/Brown gas) Engine with load test | |
| ENAU-169 | Shaft driver bicycle with 2 speed automatic gear transmission system | |
| ENAU-170 | Fabrication of Screw shaft engine | |
| ENAU-171 | Fabrication of Active wheel | |
| ENAU-172 | Fabrication of Segway (Running model) | |
| ENAU-173 | Fabrication of Piezoelectric Powered Cycle | |
| ENAU-174 | Fabrication of Kids Car | |
| ENAU-175 | Fabrication of Foldable two wheeler | |
| ENAU-176 | Fabrication of Loading and unloading crane for ship | |
| ENAU-177 | Fabrication of All Terrain Wheel Chair | |
| ENAU-178 | Introduction of HHO gas in turbojet engine | |
| ENAU-179 | Turbo jet engine with active magnetic bearing | |
| ENAU-180 | Solar E-bike with regenerative braking system | |
| ENAU-181 | Air conditioning of automobile using engine exhaust gas | |
| ENAU-182 | Fabrication of Variable volume engine | |
| ENAU-183 | Performance analysis of evaporative air cooled condenser | |
| ENAU-184 | Pneumatic try cycle with turbocharged closed loop system | |
| ENAU-185 | Improved energy performance of a refrigerating machine using water spray upstream of the Condenser | |
| ENAU-186 | Electrical Power generation and refrigeration by using waste heat from IC engine | |
| ENAU-187 | Experimental investigation of an air conditioning system drive by Engine | |
| ENAU-188 | Numerical analysis and experimental validation of a single cylinder diesel engine with double injection | |
| ENAU-189 | Fabrication of Tamble cycle with regenerative electrical cycle | |
| ENAU-190 | Wheel chair using Eye shadow and touch screen | |
| ENAU-191 | Working of air conditioning unit using damping effect of shock absorbers | |
| ENAU-192 | Fabrication of Mono wheel bike | |
| ENAU-193 | Design and development of downdraft Gasifier for operating CI engine on dual fuel mode | |
| ENAU-194 | Fabrication of Electric Gear Bike | |
| ENAU-195 | Electric scooter powered by wind & piezoelectric power | |
| ENAU-196 | A study of conversion of diesel engine to fully biogas engine | |
| ENAU-197 | 90 degree turning steering mechanism | |
| ENAU-198 | Effect of swirl induction by internally threaded inlet manifolds on exhaust emissions of single cylinder diesel engine | |
| ENAU-199 | Modified Reverse gear two wheeler for handicapped people | |
| ENAU-200 | Fabrication of pneumatic Scooter excavator | |
| ENAU-201 | Viability of used sunflower oil as a substitute for diesel Engine | |
| ENAU-202 | Four wheel steering (Zero degree) system | |
| ENAU-203 | Two Engine Synchronization for Four Wheeler | |
| ENAU-204 | Design & Fabrication of engine operated tiller cultivator | |
| ENAU-205 | Multi tasked smart Wheel chair for physically challenged people | |
| ENAU-206 | Fabrication of Electric all terrain vehicle | |
| ENAU-207 | Tilting three wheeler with a hybrid system | |
| ENAU-208 | Fabrication of Smart trike - tilting three wheeler | |
| ENAU-209 | Fabrication of unaided automatic tri cycle | |
| ENAU-210 | Fabrication of Solar Hybrid Car | |
| ENAU-211 | Fabrication of Fly car | |
| ENAU-212 | Increasing the volumetric efficiency of four stroke engine by using ATEG | |
| ENAU-213 | Development of Homogeneous charge compression ignition (HCCI) engine on electric motor cycle | |
| ENAU-214 | Fabrication of Self energized hybrid system | |
| ENAU-215 | Fabrication of Four wheel three mode steering system | |
| ENAU-216 | Fabrication of EGR assisted jet compressor | |
| ENAU-217 | Design and analysis of Aero spike nozzle for a air augmented rocket engine | |
| ENAU-218 | Cam shaft operated automatic gear change for two wheeler | |
| ENAU-219 | Energy-harvesting shock absorber with a mechanical motion rectifier | |
| ENAU-220 | Fabrication of Quad bike | |
| ENAU-221 | Fabrication of Buggy with solar hybrid vehicle | |
| ENAU-222 | Automatic parking breaking system for four wheeler | |
| ENAU-223 | Fabrication of Hydraulic lifting system for total car | |
| ENAU-224 | Electro-magnetic braking on propeller shaft |